 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| RN142G Diodes PIN diode RN142G Application High frequency switching External dimensions (Units : mm) 1.00.05 1.40.05 Features 1) Ultra small mold type (VMD2) 2) High frequency resistance which is small and low capacity. 0.60.05 0.270.03 CATHODE MARK 0.130.03 K ROHM : VMD2 EIAJ : JEDEC : 0.50.05 Construction Silicon epitaxial planer Absolute maximum ratings (Ta=25C) Parameter Reverse voltage Forward current Junction temperature Storage temperature Symbol VR IF Tj Tstg Limits 60 100 150 -55+150 Unit V mA C C Electrical characteristics (Ta=25C) Parameter Forward voltage Reverse current Capacitance between terminal Foward resistance Symbol VF IR CT rF Min. - - - - - Typ. - - - - - Max. 1.0 0.1 0.45 3.0 2.0 Unit V A pF IF=10mA VR=60V VR=1.0V, f=1.0MHz IF=3mA, f=100MHz IF=10mA, f=100MHz Conditions Please pay attention to static electricity when handling. 1/2 RN142G Diodes Electrical characteristic curves (Ta=25C) CAPACITANCE BETWEEN TERMINALS : CT (pF) 100 10 150C 1 100n 10n 1n 100p 10p 0 125C 0.5 0.45 0.4 0.35 0.3 0.25 0.2 0.15 0.1 0.05 0 0 2 4 6 8 10 f=1.8GHz f=900MHz f=1MHz FORWARD CURRENT : IF (mA) 10 25C -25C REVERSE CURRENT : IR (A) 150C 125C 75C 75C 25C 1 0.1 200 400 600 800 1000 1200 20 40 60 FORWARD VOLTAGE : VF (mV) REVERSE VOLTAGE : VR (V) REVERSE VOLTAGE : VR (V) Fig.1 Forward caharacteristics Fig.2 Reverse characteristics Fig.3 Capacitance vs. Reverse voltage 3.5 FOWARD RESISTANCE : RF () 3 2.5 f=100MHz f=900MHz 2 1.5 1 0.5 0 0 2 4 6 8 10 f=1.8GHz FORWARD CURRENT : IF (mA) Fig.4 Forward resistance vs. Forward current 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document use silicon as a basic material. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.0 |
Price & Availability of RN142G
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |